Legacy Electronics

Obsolescense Notice:

The Oilgear analog module rack ans mini rack control systems have, since the year 2000, been replaced by the new microprocessor based, din rail mounted, EPC Servo Controller. For more information contact the Oilgear Automation Systems department at 414-327-1700 in the United States or by our Contact Page.

19" Rack

The Analog Module Rack control system was developed in the late 1960's. Oilgear Automation System's goal was to be able to engineer custom control systems using standard modular building blocks. Each module was designed using solid-state technology, with test points, and adjustment points clearly identified on the front of the module. To add greater versatility, each standard module was designed with a number of options which can be selected when back plane wiring the module rack. All modules where performance tested at the time of manufacture and again during the final system test. Modules were housed in an aluminum rack, which became a complete functioning unit after being back plane wired. Since the introduction of Oilgear Automation Systems EPC Servo Controller, this rack design has become obsolete. However, most of the Analog Rack documentation is still available for download in the Technical Library.

 

Mini-Rack

The Mini-Rack control system was developed shortly after the 19" rack system.

Oilgear Automation System's goal was to be able to engineer custom control systems using standard modular building blocks. Each module was designed using solid-state technology, with test points, and adjustment points clearly identified on the front of the module. To add greater versatility, each standard module was designed with a number of options which can be selected when back plane wiring the module rack. All modules where performance tested at the time of manufacture and again during the final system test. Modules were housed in an aluminum rack, which became a complete functioning unit after being back plane wired. Since the introduction of Oilgear Automation Systems EPC Servo Controller, the Mini-Rack design has become obsolete. However, most of the Analog Rack documentation is still available for download in the Technical Library.

 

A.C. Amplifier

If you have a Oilgear AC Amplifier unit like the one shown below you need to replace it now; there is no longer a way for Oilgear to service or support these units. Please contact Oilgear at 414-327-1700 in the United States or by by using our convenient Contact Page.

The AC Amplifier was first developed to answer the calling of the increased complexity of control systems in all fields of manufacture during the late 50's. Since then the AC amplifier has been replaced by the Analog Rack System and from there by the EPC Servo Controller. The AC Amplifier is Obsolete and can no longer be supported as most of the components used to construct it are no longer available. However Oilgear Automation Systems can assist you in upgrading to an EPC Servo Controller to work in place of your AC Amplifier.

Please wait while we gather your results.

인증서

오일기어는 정식 규격으로서 ISO 9001:2000 및 ASME, ANSI, JIC, NFPA, OSHA, (CE)규격에 준하여 설계 및 생산이 이루어지고 있습니다.

Please wait while we gather your results.
Contact the Oilgear Company

Contact Us

오일기어코리아의 웹사이트, 오일기어 제품, 오일기어 시스템에 관한 의견 혹은 그 외의 다른 어떤 의견이나 제안을 갖고 계시다면 저희에게 의견을 제시하여 주십시오. 고객님의 그 어떤 말씀도 소중히 숙지하여 더 발전된 모습으로 나아가도록 노력할 것입니다.